DC Super Shine Blog RSS



Rough tanks and what to use - How to polish aluminum

  These tanks had not been done in several years.   the Products we used to get this result   Step 1 Sanding 320, 400 and 600 grit sand paper http://dcsupershine.myshopify.com/collections/sand-paper   Step 2 Cutting Stage FastCut buffing wheel http://dcsupershine.myshopify.com/collections/trucks/products/new-highway-shine-10-medium-heavy-cut-buffing-wheel 439T Rouge bar, heavy cut http://dcsupershine.myshopify.com/collections/trucks/products/439-t-rouge-bar-approx-2-5-lb-green-bar-heavy-cut-3-pack   Step 3 Finishing White untreated Buffing wheel http://dcsupershine.myshopify.com/collections/trucks/products/new-highway-shine-10-white-untreated-buffing-wheel Matchless Blue Rouge bar http://dcsupershinestore.com/products/matchless-blue-rouge-bar-8b56-3-bars     and of course using  a 6000 rpm Dewalt grinder http://dcsupershinestore.com/collections/tools/products/dewalt-d28499x-7-9-6-000-rpm-5-3-hp-angle-grinder   hope this helps shed some light on how to achieve a mirror shine Denis Champagne Master Detailer - Onwer at DC Super Shine     JOIN our Newsletter Receive FREE Tips, Products reviews and Information about Aluminum polishing, paint Correction and Detailing in general. First Name *...

Continue reading





How to polish Aluminum “THE RIGHT WAY” – DC Super Shine

I’m a polisher not a writer! I’ve been in the detailing industry for over 20 years now, and one of the top questions I get asked is how can I get my aluminum tanks to shine like yours… A few of my videos on youtube give a general idea of how to get a good mirror finish. But still lack all the little things that should be done to achieve such a shine. In this article I will try and cover all the basis. Before I begin please remember there are 10, 20, 100 ways to do all things… after trying many many different ideas and other methods this is how I do it! #1 Prepping the surface Make sure...

Continue reading